GEMÜ N085 & N185

Description

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw.

Tecnical description

Technical specifications:

• Nominal sizes: DN 10 to DN 100
• Connections: Spigots, flanges, union ends with insert
• Body materials: PVC-U, PP-B, PVDF
• Seal materials: EPDM, PTFE
• Media temperature: -20 °C to +100 °C
• Setting range: 0.5 to 10 bar

Advantages:

• Valve adjustments can also be made under working pressure
• The optimization of piston, springs and control face ensures good control characteristics
• The actuator is hermetically separated from the medium