MPCT301 P6 REGULATER

Description

The MPCT301 P6 model is a programmable instrument with uni-directinal pulse counter, rpm meter, frequency meter, hourly production meter or timer.

The instrument offers the following functions:

• memorized count after power down
• 6 digit counters
• analogue outputs (4÷20mA, 0÷20mA o 0÷10V)
• bi-directional serial outputs with opto isolation (RS485 half duplex)
• input from encoders – NPN or PNP sensors or mechanical contact
• possibility of “up” or “down” counting
• pre-set DOWN counting (counter and timer)
• divisor programmable from 1 to 65535
• multiplier programmable from 1 to 65535
• 8 programmable scales in timer mode
• in timer mode it is possible to select a stop watch function (hold and reset) or a chronometer (start, stop, reset)
• total count functioning
• 3 alarm outputs ( 5A relay)
• alarms in RPM, frequency meter and hourly production mode: threshold or windows
• alarms in counter or timer mode: threshold, threshold with stop counting or automatic cycle

Tecnical description

• Transducer power supply: 16Vdc / 50 mA unregulated on request 5Vdc 20 mA
• Counter max input frequency: 10KHz
• RPM max input frequency: 10KHz
• Exchange relay output: 5A / 250Vac
• Analogue outputs features:
  • Analog outputs: 4÷20mA – 0÷20mA – 0÷10V
  • Max load for current output: 400Ω
  • Min. load for voltage output: 1KΩ
  • Resolution: 12 bit
• Power supply: 90÷260 Vac/Vdc, 20÷30 Vac/Vdc
• Power absorption: 5 W
• Max working temperature: 50 °C
• Digits height : 13 mm
• Dimensions: 48×96 (75 mm. Depth)
• Mounting plate: 44,5 mm (h) x 92,5 mm (l)
• Weight: 250 g
• Mounting: by bolts

OPTIONS AND SERIAL OUTPUTS

• SR1÷3: 1÷3 relay alarms
• OAP: Analogue outputs (0÷20mA, 4÷20mA, 0÷10V)
• V5: Transducer power supply 5Vdc / 20mA
• IBT: Magnetic sensor input
• Cod. 2: RS 422 bi-directional
• Cod. 3: RS 485 bi-directional
• Cod. 4: RS 232 bi-directional
• Cod. 12: RS 422 optoisolated bi-directional
• Cod. 13: RS 485 optoisolated bi-directional
• Cod. 14: RS 232 optoisolated bi-directional